| Basic Construction: | Heavy Weight - Machanically Annular Hose Standard Pitch Design |
| Size: | 1/4" Through 2" |
| Hose Materials: | 321 /316 L Grade |
| Braid Material: | 304 / 316 Grade |
| DIMENSION | MAXIMUM PRESSURE @ 20 DEGREE | BENDING RADIUS - MM | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SIZE | DN | PART NO FOR SS 316L HOSE WITH SS 304 BRAID | PART NO FOR SS 316L HOSE WITH SS 316 BRAID | BRAID LAYER | ID IN MM | OD IN MM | BRAID SPEC | WORKING PRESSURE (BAR) | TEST PRESSURE (BAR) | NOMINAL BURST (BAR) | DYNAMIC | STATIC |
| 1/4" | 6 | MH600-06-00 | MH600-06-00 | 0 | 6.00 | 9.60 | 10 | 15 | - | 124.00 | 50.00 | |
| MH600-06-01-04 | MH600-06-01-16 | 1 | 10.80 | 170 | 255 | 680 | ||||||
| MH600-06-02-04 | MH600-06-02-16 | 2 | 12.00 | 255 | 383 | 1020 | ||||||
| 3/8" | 10 | MH600-10-00 | MH600-10-00 | 0 | 10.10 | 14.20 | 5 | 8 | - | 152.00 | 50.00 | |
| MH600-10-01-04 | MH600-10-01-16 | 1 | 15.50 | 113 | 170 | 482 | ||||||
| MH600-10-02-04 | MH600-10-02-16 | 2 | 16.70 | 170 | 255 | 680 | ||||||
| 1/2" | 12 | MH600-12-00 | MH600-12-00 | 0 | 12.40 | 16.70 | 5 | 8 | - | 175.00 | 60.00 | |
| MH600-12-01-04 | MH600-12-01-16 | 1 | 18.00 | 91 | 137 | 364 | ||||||
| MH600-12-02-04 | MH600-12-02-16 | 2 | 19.20 | 137 | 206 | 548 | ||||||
| 3/4" | 20 | MH600-20-00 | MH600-20-00 | 0 | 20.30 | 26.70 | 3 | 5 | - | 180.00 | 70.00 | |
| MH600-20-01-04 | MH600-20-01-16 | 1 | 27.80 | 72 | 108 | 288 | ||||||
| MH600-20-02-04 | MH600-20-02-16 | 2 | 29.00 | 108 | 162 | 432 | ||||||
| 1" | 25 | MH600-25-00 | MH600-25-00 | 0 | 25.40 | 32.40 | 3 | 5 | - | 229.00 | 104.00 | |
| MH600-25-01-04 | MH600-25-01-16 | 1 | 33.50 | 55 | 83 | 220 | ||||||
| MH600-25-02-04 | MH600-25-02-16 | 2 | 34.70 | 83 | 125 | 332 | ||||||
| 1 1/4" | 32 | MH600-32-00 | MH600-32-00 | 0 | 33.60 | 41.20 | 3 | 5 | - | 267.00 | 117.00 | |
| MH600-32-01-04 | MH600-32-01-16 | 1 | 42.80 | 42 | 63 | 168 | ||||||
| MH600-32-02-04 | MH600-32-02-16 | 2 | 44.40 | 63 | 95 | 252 | ||||||
| 1 1/2" | 40 | MH600-40-00 | MH600-40-00 | 0 | 39.80 | 49.50 | 2 | 3 | - | 292.00 | 152.00 | |
| MH600-40-01-04 | MH600-40-01-16 | 1 | 51.10 | 45 | 68 | 180 | ||||||
| MH600-40-02-04 | MH600-40-02-16 | 2 | 52.70 | 68 | 102 | 272 | ||||||
| 2" | 50 | MH600-50-00 | MH600-50-00 | 0 | 50.20 | 60.30 | 2 | 3 | - | 318.00 | 160.00 | |
| MH600-50-01-04 | MH600-50-01-16 | 1 | 62.30 | 40 | 60 | 160 | ||||||
| MH600-50-02-04 | MH600-50-02-16 | 2 | 64.30 | 60 | 90 | 240 | ||||||
| TOLERANCE : ID&OD for 1/4" To 2" is ±0.50 mm , Minimum Burst Pressure 1:4 from Working pressure - The specification will meet the product according to EN ISO 10380 - 2012 version. - The Part No for Loose Braid will be just MH600-SSB-(SIZE)--04 (304 GRADE) 16 (316 GRADE) - | ||||||||||||
|
Notes: The minimum bend radius is measured from the centerline of the hose The working pressure decreases when temperature increases For rapid pressure fluctuations consult the factory if changes the grade for 304 might be 04 if 321 21 to be changed |
||||||||||||
Copyright 2021 Madras Hydraulic Hose (P) Ltd
All Rights Reserved. Designed By ajgrapix.com